TeamViewer Forum

General Category => Teamviewer for Windows => Topic started by: queendd1980 on August 02, 2014, 04:29:05 AM

Title: My Webcam came on by it's self and my logfile looks iffy ?!?
Post by: queendd1980 on August 02, 2014, 04:29:05 AM

Hi, today I noticed the webcam light on my laptop came on by itself but the webcam interface I am used to did not start. All I noticed was the light. I installed Teamviewer about 2 weeks ago to connect my laptop to my desktop on my home network. This is really the only change I have made to my system so I took a look at the Teamviewer logfile and it appears my Teamviewer machine is connecting to a Teamviewer ID I am unfamiliar with. I only use Teamviewer to connect my laptop (606432381) to my desktop (606625966). I really hope that I am wrong. I included a snippet of the log and also attached a longer copy - I am by no means an expert at read the log. Thank You.

---

Quote

2014/08/02 04:36:14.602 10764  2368 G1   CBuddyWindow::OnTimer(): System has become idle. TimeUntilIdle: 300000
2014/08/02 04:36:14.654 10764  2368 G1   CBuddyWindow::ChangeOnlineStateInternal: Setting online state to status:"ST_BL_AWAY" aos:"AOS_Away"
2014/08/02 04:36:14.654  3316  3512 S0   CSendCommandToMaster::SendBCommandToMaster: CC=3 CT=33
2014/08/02 04:36:15.275  3316  9968 S0   CT12 CT.Receive.CMD_ROUTERCMD From=583424641 To=606432381 L=98
2014/08/02 04:36:15.275  3316  9968 S0   CConnectionThread::ProcessBuddyCommandClient: CC=3 CT=1
2014/08/02 04:36:15.276  3316  9968 S0   CT12 CT.Receive.CMD_ROUTERCMD From=583424641 To=606432381 L=98
2014/08/02 04:36:15.276  3316  9968 S0   CConnectionThread::ProcessBuddyCommandClient: CC=3 CT=33
2014/08/02 04:36:28.686 10764  2368 G1   CMainWindow::TrackIdleTime(): System goes idle. AdminRights:1 SystemTime:1406972188 LastAutoUpdate:1406827391 AutoUpdateMode:0
2014/08/02 04:47:16.634  3316  9968 S0   CT12 CConnectionThread::CmdPingRouter(): Router Pong Received with following Hops: 606432381 583424641
2014/08/02 05:17:35.360  3316  9968 S0   CT12 CConnectionThread::CmdPingRouter(): Router Pong Received with following Hops: 606432381 583424641
2014/08/02 05:47:54.087  3316  9968 S0   CT12 CConnectionThread::CmdPingRouter(): Router Pong Received with following Hops: 606432381 583424641
2014/08/02 06:01:54.652 10764  2368 G1   CBuddyWindow::OnTimer(): System is back to active
2014/08/02 06:01:54.652 10764  2368 G1   CBuddyWindow::ChangeOnlineStateInternal: Setting online state to status:"ST_BL_ONLINE" aos:"AOS_Online"
2014/08/02 06:01:54.652  3316  3512 S0   CSendCommandToMaster::SendBCommandToMaster: CC=3 CT=33
2014/08/02 06:01:54.877  3316  9968 S0   CT12 CT.Receive.CMD_ROUTERCMD From=583424641 To=606432381 L=98
2014/08/02 06:01:54.877  3316  9968 S0   CConnectionThread::ProcessBuddyCommandClient: CC=3 CT=1
2014/08/02 06:01:54.878  3316  9968 S0   CT12 CT.Receive.CMD_ROUTERCMD From=583424641 To=606432381 L=98
2014/08/02 06:01:54.878  3316  9968 S0   CConnectionThread::ProcessBuddyCommandClient: CC=3 CT=33

Title: Re: My Webcam came on by it's self and my logfile looks iffy ?!?
Post by: matt on August 02, 2014, 06:30:30 PM

I'd run antiMalware plus AntiVirus sweep
And the repeat

I've seem trojans do this

Title: Re: My Webcam came on by it's self and my logfile looks iffy ?!?
Post by: queendd1980 on August 02, 2014, 07:11:12 PM

Thanks for the reply. I have since uninstalled and I ran both anti-malware and anti-virus software, but it found nothing. I really wish there was a way to fix this. I love using TV